CPU starts but monitor no signal FIX:

Hey whats up guys? This is Santhosh kumar for a tut.

This problem is caused by the damaged peripherals mostly. But don't worry this could also be due to the cmos problems. CMOS is a battery which is placed in your cpu's motherboard. This also acts as a RAM. Taking this as an issue will let you diagnose the problem from the basic test. But sadly there are no ways to identify if that causes the problem in your CPU. Some people might find the odd functions of their CPU fans and the casing fans. This could also probably be a symptom of the CMOS trouble causings.

This will lead you through the fix. If you some basica about the CPU, motherboard then you could have closed this tab already. If you are still reading this you absolutely have'nt found the solution yet from the above texts. Don't worry, I'll help you.

The picture shown here is the CMOS that i mentioned above. You will have to replace this one with a new one. The price of this CMOS ranges from 10 INR to 20 INR. So changing this will not be a problem..

Remove your CPU chassis and keep your screws safe.

Remove your RAM before you perform this action.

Then find the place where the CMOS is in your CPU.

I said so because, this changes from CPU to CPU even with the same OEM.

Now replace the CMOS with a new one.

Now you know what to do.

Run the computer now.

If you still get the error, check your /vga cable which connects your monitor and the CPU. Some CPUs might have two VGA connector ports as in mine. So plug in the monitor's VGA cable into the VGA port from your GPU. Find out where it is when you open your chassis.

You are done fixing it.

Have a good day.

@fojoheartthrobe